Ferguson TED20 - Fitting the Crankshaft - Video Tutorial

Gordon and Oscar fit the crankshaft - fundamental in converting the up and down motion of the pistons to a rotational movement of the engines output shaft.  

'Fitting the new Anglo Agriparts crankshaft and main bearings on the Ferguson TED20. The rear main bearing cap is a complex component and it takes a fair amount of patience and persistence to get it installed. Watch as Oscar and I step you through how we did it.'


Gordon uses:

Crankshaft Bare:  A67403 

Main Bearing:  A57594 

Crankshaft Seal, Rear: A57170



On their smallholding in north Devon Gordon, Kathy and Oscar spend many weekends working on their land and their tractors.  In this instructional video Gordon and Oscar takes you through the steps to fit the crankshaft. Visit their channel for more instructional videos for your tractor: Waterhouse Forde

Ferguson TED20 - Fitting the Crankshaft - Video Tutorial

 

Anglo Agriparts stock 1000's of parts for Ferguson tractors, buy parts for your Ferguson TED20:

Buy Ferguson TED20 Parts >>   Ferguson TE20 Serial Numbers >>   The History Of Ferguson >> 



Licence Terms

You are free to: Share, copy & redistribute the material in original format for any purpose as long as you follow the license terms below:

  • Attribution – you must give appropriate credit and provide a link to the original article in a reasonable and visible manner
  • You may not in any way suggest that the licensor endorses you or your use.
  • No Derivatives – The material must be distributed in full, including disclaimer, you may not distribute or share modified material.
  • No additional restrictions – You may not apply legal terms that legally restrict others from doing anything the licence permits.
  • No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example other rights such as publicity, privacy, or moral rights may limit how you use the material.

Disclaimer

Anglo Agriparts nor any such reviewers or contributors of content provides any warranty or guarantee as to the accuracy of any information on this website and cannot accept liability for any errors or omissions. The information in this article are for general information purposes only. It does not constitute legal, technical and/or commercial advice and should not be relied upon as such. Specific advice should always be sought separately. Despite the authors best efforts the information provided in this article may not be accurate, up to date or applicable to the circumstances of any particular case. Anglo Agriparts nor the author of this article make no representations or warranties of any kind regarding the completeness or accuracy of the information contained herein and accepts no liability for loss or damage whatsoever and howsoever arising from reliance on it, regardless of whether such information originates from Anglo Agriparts, or our contributors. Anglo Agriparts has no control over the content on any other website accessed through this website and accepts no liability for any loss or damage whatsoever and howsoever arising from reliance upon the content of such websites. Neither Anglo Agriparts nor any reviewer or contributor of content on the website shall be liable to any person for any loss or damage which may arise from the use of the information contained in this article or on this website. These exclusions of liability will not apply to damages arising from death or personal injury caused by the negligence of Anglo Agriparts or any of its employees or agents or of a reviewer or contributor of content.

  • Ferguson TED20 - Fitting the Crankshaft - Video Tutorial

Related Articles

Tractor Crankshaft

Tractor Crankshaft

What is a crankshaft?

What are crankshafts made of?

What parts does a crankshaft have?

Why do crankshafts fail?

 Ferguson TED20 - Small End Bearings - Video Tutorial

Ferguson TED20 - Small End Bearings - Video Tutorial

Gordon & Oscar fit the bushes (or bearings) to reduce friction between the the piston and connecting rod of their Ferguson TED20.

Ferguson TED20 - Installing The Pistons - Video Tutorial

Ferguson TED20 - Installing The Pistons - Video Tutorial

Progress is being made! - In their latest video Gordon & Oscar install the pistons - the beating heart of an engine.  Combined with piston rings they  perform the crucial task of creating an airtight seal between the combustion chamber and the crankcase. The pressure allows the piston to move up and down within the hollow cylinder of the engine block.

Ferguson TED20 - Fitting the Timing Gear Video tutorial

Ferguson TED20 - Fitting the Timing Gear Video tutorial

In this video Gordon takes us through the process of fitting the timing gear on his Ferguson TED20 tractor.

International Harvester 434 Major Works Part 9 - Crankshaft

International Harvester 434 Major Works Part 9 - Crankshaft

This article describes the installation of the crankshaft, main and big-end shells in an International Harvester 434.  

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments