Ferguson TED20 - Cylinder Head Rebuild Part 1 - Video Tutorial

Contributor  Gordon from Waterhouse covers the rebuild of the cylinder head for his Ferguson TED20 tractor.

'First in a series about rebuilding the cylinder head on our Ferguson TED20. In this video we show you how to; check the head and engine block surfaces, install the valve guides and lap the valves.'

Gordon uses:

Valve Train Set: A67378



On their smallholding in north Devon Gordon, Kathy and Oscar spend many weekends working on their land and their tractors.  In this video Gordon and Oscar takes you through the steps to rebuild a cylinder head for a Ferguson TED20  tractor, and will walk you through each process, with advice along the way. Visit their channel for more instructional videos for your tractor: Waterhouse Forde

Ferguson TED20 - Rebuilding The Cylinder Head Video Tutorial

 

Anglo Agriparts stock 1000's of parts for Ferguson tractors, buy parts for your Ferguson TE20:

Buy Ferguson TE20 Parts >>   Ferguson TE20 Serial Numbers >>   The History Of Ferguson >> 



Licence Terms

You are free to: Share, copy & redistribute the material in original format for any purpose as long as you follow the license terms below:

  • Attribution – you must give appropriate credit and provide a link to the original article in a reasonable and visible manner
  • You may not in any way suggest that the licensor endorses you or your use.
  • No Derivatives – The material must be distributed in full, including disclaimer, you may not distribute or share modified material.
  • No additional restrictions – You may not apply legal terms that legally restrict others from doing anything the licence permits.
  • No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example other rights such as publicity, privacy, or moral rights may limit how you use the material.

Disclaimer

Anglo Agriparts nor any such reviewers or contributors of content provides any warranty or guarantee as to the accuracy of any information on this website and cannot accept liability for any errors or omissions. The information in this article are for general information purposes only. It does not constitute legal, technical and/or commercial advice and should not be relied upon as such. Specific advice should always be sought separately. Despite the authors best efforts the information provided in this article may not be accurate, up to date or applicable to the circumstances of any particular case. Anglo Agriparts nor the author of this article make no representations or warranties of any kind regarding the completeness or accuracy of the information contained herein and accepts no liability for loss or damage whatsoever and howsoever arising from reliance on it, regardless of whether such information originates from Anglo Agriparts, or our contributors. Anglo Agriparts has no control over the content on any other website accessed through this website and accepts no liability for any loss or damage whatsoever and howsoever arising from reliance upon the content of such websites. Neither Anglo Agriparts nor any reviewer or contributor of content on the website shall be liable to any person for any loss or damage which may arise from the use of the information contained in this article or on this website. These exclusions of liability will not apply to damages arising from death or personal injury caused by the negligence of Anglo Agriparts or any of its employees or agents or of a reviewer or contributor of content.

  • Ferguson TED20 - Cylinder Head Rebuild Part 1 - Video Tutorial

Related Articles

International Harvester 434 Major Works Part 2 - Cylinder Head Overhaul

International Harvester 434 Major Works Part 2 - Cylinder Head Overhaul

Contributor Andrew Chapman undertakes a major overhaul of his International Harvester 434. In part 2 he covers the cylinder head and valve overhaul.

Ferguson TED20 - Cylinder Head Rebuild Part 2 - Video Tutorial

Ferguson TED20 - Cylinder Head Rebuild Part 2 - Video Tutorial

Ferguson TED20 - Cylinder Head Part 2 - Video Tutorial. 'As we saw in the last video the valve guides need reaming. Using a new set of adjustable reamers we just bought, in this video we have a go at getting this job done.'

Ferguson TED20 - Cylinder Head Rebuild Part 3 - Video Tutorial

Ferguson TED20 - Cylinder Head Rebuild Part 3 - Video Tutorial

Lapping the valves was not giving us a great result so we decided to buy a valve cutting set and freshen the valve seats. 

Ferguson TED20 - Improving the Valve Seats - Video Tutorial

Ferguson TED20 - Improving the Valve Seats - Video Tutorial

In his last video on the restoration of his Ferguson TED20 contributor Gordon from Waterhouse Forde found the exhaust valve seat on cylinder 2 was too broad - in his latest video Gordon and Oscar reduce the head face to improve this.

Ferguson TED20 - Fitting the Cylinder Head - Video Tutorial

Ferguson TED20 - Fitting the Cylinder Head - Video Tutorial

In this video Gordon takes us through the process of fitting the cylinder head on his Ferguson TED20 tractor.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments