Ferguson TED20 - Removing The Steering Box - Video Tutorial
The steering box contains the gears that transmit the driver's steering movements to the steering linkage that turns the wheels. In this video Gordon investigates steering issues on his TED20 - part 1 follows the step by step removal of the steering box.
'Now that the axle is complete we move onto the Steering box. Removing it and dismantling to determine why it is so tight. We are going to run through the whole of the mechanism to make sure it is as good as we can get it.'
On their smallholding in north Devon Gordon, Kathy and Oscar spend many weekends working on their land and their tractors. Visit their channel for more instructional videos for your tractor: Waterhouse Forde
Ferguson TED20 - Removing The Steering Box - Video Tutorial
Anglo Agriparts stock 1000's of parts for Ferguson tractors, buy parts for your Ferguson TED20:
You are free to: Share, copy & redistribute the material in its original format for any purpose as long as you follow the license terms below:
Attribution – you must give appropriate credit and provide a link to the original article in a reasonable and visible manner
You may not in any way suggest that the licensor endorses you or your use.
No Derivatives – The material must be distributed in full, including the disclaimer, you may not distribute or share modified material.
No additional restrictions – You may not apply legal terms that legally restrict others from doing anything the license permits.
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
Disclaimer
Anglo Agriparts nor any such reviewers or contributors of content provides any warranty or guarantee as to the accuracy of any information on this website and cannot accept liability for any errors or omissions. The information in this article is for general information purposes only. It does not constitute legal, technical and/or commercial advice and should not be relied upon as such. Specific advice should always be sought separately. Despite the author's best efforts the information provided in this article may not be accurate, up to date, or applicable to the circumstances of any particular case. Anglo Agriparts nor the author of this article make no representations or warranties of any kind regarding the completeness or accuracy of the information contained herein and accepts no liability for loss or damage whatsoever and howsoever arising from reliance on it, regardless of whether such information originates from Anglo Agriparts, or our contributors. Anglo Agriparts has no control over the content on any other website accessed through this website and accepts no liability for any loss or damage whatsoever and howsoever arising from reliance upon the content of such websites. Neither Anglo Agriparts nor any reviewer or contributor of content on the website shall be liable to any person for any loss or damage which may arise from the use of the information contained in this article or on this website. These exclusions of liability will not apply to damages arising from death or personal injury caused by the negligence of Anglo Agriparts or any of its employees or agents or of a reviewer or contributor of content.
Part 2 of Andrew Chapman's steering overhaul review. This article is based on rebuilding the steering knuckles and hubs on Bradford built International Harvester B275, B414 and 434 tractors.
This
article is based on rebuilding the front axle pivot pin and bushes on Bradford
built International Harvester B275, B414 and 434 tractors. The design of the
parts are however similar to those on many tractors of the period and so should
be of general use
The final article in the 'Steering Overhaul' series by contributor Andrew Chapman. This article focuses primarily on steering boxes fitted to Bradford built International Harvester tractors.